How to charge a car battery – Encyclopedia

In the following paragraphs, we will explain to you in detail the car battery charging method. when buying these vehicles in order to move from one place to another, and the cars work through a set of different equipment and devices which are interconnected with each other and work together to move the vehicle, and in many cases, some of this equipment is damaged, resulting in breakdown and inability of the vehicle to move, as the battery runs out, and for this we will show you through the following encyclopedia article how to charge the battery again.

How to charge a car battery

The car battery is one of the main components of the car, the vehicle will not be able to move or operate without it, and the battery works by producing and generating electrical energy through chemical energy, and the energy that is produced is what helps in the process of fuel combustion in the vehicle, and this process is carried out by the presence of cells in the battery which helps to produce a difference in electrical potential.

The most common way to charge the car battery is to use cables and connect the car to another car, then charge the battery.Car battery from another car with steps:

  • And then using the cables that connect the two batteries and recharge the empty battery.
  • And then connect the two clips on the red cable, and connect the two clips on the blue or black cable.
  • Then open the hood of both cars.
  • And then connect the red cable clip to the positive side batteries.
  • Then connect the blue or black cable to the batteries of both cars on the negative side.
  • Then, run the used car until some of its battery is drained to the other car.
  • Wait a few moments until the empty battery is filled, then start the engine of the car whose battery is empty.
  • After starting the engine, wait a moment, then disconnect the cables that were connected to the two cars, while ensuring that the engine of the car whose battery was charged continues to run for a short time to ensure that the charging of the battery is full.

There are some things that should be considered while performing the empty battery charging process, in order to avoid errors that may damage the car or injure the users, and these things are:

  • Care should be taken to install the cables in both cars tightly and stably.
  • When connecting the cables to the two vehicles, they must first be connected to the vehicle whose battery is depleted.
  • Care must be taken that the black cable is connected to the metal part of the battery.

the critic










Leave a Reply

Your email address will not be published. Required fields are marked *